Skip to main content

SPE Logo 

SPE Thermal Well Integrity and Production Symposium
30 November–3 December 2026 | Fairmont Banff Springs Hotel | Banff, Alberta, Canada

Technical Program

Hero Subpage

background

Technical Program

Loading
1530
  1. 60 mins
1630
  1. Van Horne A
    90 mins

    Session Chairs: Christian Hamuli, Alberta Energy Regulator; Candice Malvin; Mahdi Mahmoudi, FET Variperm

    t

    From pioneering thermal development and carbon capture to advancing well integrity and responsible resource growth, this session explores how Alberta's innovation, expertise, and infrastructure position it to lead the next chapter of energy development. The session will conclude with a fireside chat focused on what lies ahead for Alberta and how its experience can help shape the future of energy development beyond provincial boundaries.

    Keynote Presenter: Theresa Watson, Board of Director - Alberta Energy Regulator
    Moderator: Candice Malvin

1800
  1. Mt. Stephen Hall
    150 mins
0730
  1. 60 mins
  2. President's Hall
    60 mins
0830
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    Thermal well performance begins with well construction practices that anticipate and mitigate integrity risks throughout the asset life cycle. This session explores the critical relationship between w ...
1000
  1. 30 mins
  2. Foyer
    30 mins
    • Poster
1030
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
1200
  1. President's Hall
    90 mins
1330
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    This technical session explores emerging technologies and field applications aimed at improving the performance, reliability, and efficiency of thermal recovery wells. Presentations will examine insul ...
1500
  1. 30 mins
  2. Foyer
    30 mins
    • Poster
1530
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    The session will provide lessons learned from a case study involving cementing a high pressure (16000 Psi) high temperature (248°C) well in Uzbekistan and reports on testing of carbon and low alloy st ...
1700
  1. 90 mins
2030
  1. 120 mins
0730
  1. 60 mins
  2. President's Hall
    60 mins
0830
  1. Van Horne A
    90 mins
    • Panel

    Four thermal operators share how they screen and redevelop brownfield thermal assets to unlock high-margin production. Hear the strategies, technologies, and operational practices that maximize value from existing projects, then bring your questions for a candid panel discussion.

    Speakers:

    • Mark Anderson, Exploitation Engineer – Surmont, ConocoPhillips
    • Tim Gorham, Advisor Heavy Oil Production Engineer, Chevron 
    • Trevor Holding, Reservoir Engineer, Imperial 
    • Dan Wallace, Exploitation Engineer, Canadian Natural Resources 

    Moderators:

    • Noel Devere-Bennett, Implementation Pad Lead, ConocoPhillips
    • Jesse Gore, Senior Well Integrity Engineer Cenovus 
1000
  1. 30 mins
1200
  1. 90 mins
1330
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    Explore innovative technologies and emerging solutions driving advancements across the energy industry.  This session provides a technical perspective on how new technologies are being applied to addr ...
1500
  1. 30 mins
1530
  1. Van Horne A
    90 mins

    Facilitators: Carl Dyck, Tier1 Energy & Justin Tracey, Cenovus

    SAGD startup strategies vary with reservoir conditions, well type, completion design, available facilities, and the desired path to stable production. This interactive breakout will compare approaches for greenfield, brownfield, infill, redevelopment, and redrill startups. Discussion will examine the selection and application of bullheading, steam circulation, gas-assisted unloading or gas lift, and hybrid strategies; the effects of completion design and thermal performance; and the measurements used to assess communication, conformance, and startup progression. Through anonymous polling, short operating scenarios, and facilitated table discussions, participants will identify practical success factors, emerging technologies, recurring failure modes, and red flags that should trigger a change in plan. The objective is to discuss a practical startup decision framework rather than prescribe a single operator-specific procedure.

  2. DC Coleman
    90 mins

    Facilitators: Dan Dall'Acqua & Victor Yung, Noetic Engineering

    Casing deformation can pose challenges in numerous types of well applications, including thermal EOR wells. It has been the subject of academic study, an SPE Work Group for hydraulic fracturing applications, and product and service development, and in some cases still disrupts operator workflows and can lead to operational issues or the need for well remediation or abandonment. While deformation drivers are varied, the most challenging deformations to mitigate tend to be related to geomechanical movement during completions or production operations.

    This breakout session is specifically intended to create collaborative discussion on how best to plan, execute, and interpret multi-finger caliper or high-resolution ultrasonic casing shape logs to characterize the nature of casing deformations in thermal intermediate casing as a mechanism for recovery operations and future mitigations.

  3. Beatty/Shaughnessy
    90 mins

    Facilitators: Marty Lastiwka & Steve Taitinger, Steelhaus & Alberto Uzcategui, Inflow Control

    Still using AI mostly as a search engine? Ever wished there were an app for that? In this hands-on session, we’ll build working tools with AI in real time. We’ll start with simple tools and work up to something more sophisticated, showing you the steps along the way so anyone can make useful tools quickly and easily. Throughout the session, we’ll also have an open discussion about where AI tools stand today and where they’re heading in our workplaces.

    Want to build along? Bring a laptop. To get the most out of the session, we recommend a paid subscription to a tool like Claude or ChatGPT (about $30/month). The paid versions unlock the features we’ll be using to build tools. A free account will still let you follow along.

0730
  1. 60 mins
  2. President's Hall
    60 mins
0830
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    Explore three complementary perspectives on SAGD completions, showing how modeling, design analysis, and field-trial results can inform production optimization.
1000
  1. 30 mins
1030
  1. Van Horne A
    90 mins
    • Technical and Invited Presenter
    A proper understanding of a well’s integrity status requires a thorough assessment of its design basis, analysis of well integrity information obtained through testing and logging, and evaluation of t ...
1200
  1. 60 mins