Skip to main content
Loading

Technical Session 26: Drilling in HPHT Environment

Thursday, 16 October
Meeting Room 2, Level 3
Technical Session
Session Chairpersons
Jonggeun Choe - Seoul National University
Sweehong Ong - PETRONAS Carigali Sdn Bhd
  • 1400-1420 226457
    Defining the Mud Weight Window While Drilling through Depleted and Overpressured Reservoirs in a HPHT Well
    A. Chatterjee, A. White, S. Asadi, Baker Hughes
  • 1420-1440 226279
    Overcoming Drilling Hazards and Pore Pressure Uncertainty, an Mpd Approach in the Kra Al Maru Field for the Deepest Well Since 2002.
    R.M. Al-Qabandi, H. Benyounces, Weatherford; J. Bashir, A. Al-Shehab, A.M. Al-Saeedi, A. AL-Ajmi, M. Al- Hashemi, A. Kumar, Kuwait Oil Company
  • 1440-1500 226571
    Enhancing Drilling Efficiency in Limestone HPHT Sour Reservoir: Formate-Based Drill-In Fluid Application in Madura Offshore, Indonesia
    U. Fajarrenaningtyas, F. Athallah, A. Mantiri, S. Zulkarnain, A.P. Daniswara, Husky-CNOOC Madura Limited
  • 1500-1520 226387
    Enabled Resuming Drilling, Run Liner and Cementation by First Distinguishing from Kick and then Overcoming Extreme Ballooning Conditions in a Controlled Environment, Navigating Through Ultra-narrow Window in Abnormal Pressure Wells by Implementing Managed Pressure Techniques
    M. Jamal Ud-Din, C. Iturrios, F. Irawan, M. Aldhaif, A. Aldahi, M. Al Hunaidi, Weatherford; B. Tariq, Saudi Aramco
  • Alternate 226525
    A Novel and Economical Combination of (Micromax /Ilmenite) for High Pressure and High Temperature Oil-Well Cement Applications
    A. Ahmed, J. Alsabr, S. Elkatatny, King Fahd University of Petroleum & Minerals
  • Alternate 226297
    Advancing Invert Emulsion Drilling Fluid Performance in High-Pressure and High-Temperature Conditions with a Novel Organoclay Additive
    A. Mahmoud, R. Gajbhiye, S. Elkatatny, King Fahd University of Petroleum & Minerals
  • Alternate 226467
    Formation Damage Prevention in HPHT Wells: Evaluation of Cellulose Fibre and Granular LCM Using Ceramic Disc Testing
    A. Al Ghaisan, M.R. Cikal, T.M. Zaini, J.M. Jasmmine Lesmana, A.M. Abdurrahman, Sepuluh Nopember Institute of Technology; A. W, OBM Drilchem